How to use Odin

  How To Use Odin Flash Tool

Warning!

Odin is supposed to work only on Samsung devices, don’t use this guide on any other devices.keep extra cautious when you choose the firmware builds as flashing wrong firmwares might result in a bricked device. Make sure whether you’re flashing a compatible firmware or not before starting the process.

1.Enable USB Debugging

 Go to Settings> About Device.

 Scroll down to find Build number and tap it 7 times.
 You will see a toast message that “Developer mode has been enabled” on your device.
 Now go back to Settings panel and you will find a new item called Developer options there.
 Tap it and go to USB debugging option and check the box to enable it.

2.Install the Samsung USB Drivers

   Download the drivers for your device from HERE

3.Boot your Samsung phone or tablet into the Download Mode

    Turn off your device and then press and hold Volume UP + Home + Power buttons simultaneously

    for 2-3 seconds.

4.When you see the warning screen press the Volume Up key to enter Download/Odin mode

5.After that you will enter into downlaod mode and it will look like this.

6.Now its time to work with PC and use odin

Download odin from HERE

7.Click on AP and browse the .tar or .tar.md5 extension file

8.This will come after doing that then click on start

9.In case you got a multiple file firmware with AP, BL, CP, CSC, and .PIT files then you must add the firmware components to corresponding slots in Odin like shown below.

 10.Installation might take a few seconds (for CF-Root or recovery file) to 2-4 minutes (for firmwares)

 11.If you did everything correctly then Odin flash will be indicated by PASS! or RESET! message then your device will restart immediately after the process is completed.

 If you encounter a FAIL! message instead of PASS!, remove the battery from your device and re-insert it, restart Odin and repeat the process once again carefully.

 Flashing firmwares may void your device warranty either temporarily or permanently.we are not responsible for any mess up you do with your device during the process.Do at your own risk.