How To Flash MIUI On Bricked Xiaomi MI3, MI4

Steps:-

1.Download and install Mi Flash Tool on your PC from HERE.

2.Download the full Fastboot Miui Rom for Mi 3 or Mi 4 From HERE and save the file on your desktop.

3. Extract the ROM File on your C:/ Drive (Don’t extract the folder on your desktop)

4.Run MI flash tool on your desktop, the same file that you downloaded in the above step.

5.From the tool click on the ‘Browse’ button and select the image folder of the ROM file that you extracted on the C:/ drive.

6.Click on ‘Browse’ option again and Advance and Choose the “Fastboot script” from the extracted ROM folder.

Choose the script carefully as per your need:-

1.flash_all.bat:
clears all the data of the built-in storage, clear all user data, please be careful!
2.flash_all_except_storage.bat:
will erase all user data does not clear the built-in storage data.
3.flash_all_except_data_storage.bat:
does not clear the built-in storage data does not clear user data
I would recommended using the flash_all_except_storage.bat since this will wipe and flash everything but the virtual sdcard.

7. After this, Turn off the phone, press the Volume down key and the Power button at the same time to enter Fastboot mode, then connect the phone to your pc.

8. Now click on the ‘Refresh’ button and you will see the device on the tool list.

9. Once the device is connected, Click on the ‘Flash’ button and now the flashing process will start on your phone. Wait until the progress bar on MiFlash is green, which means the ROM is successfully flashed, and the phone will automatically boot.

Enjoy... (:

How To Flash MIUI On Bricked Xiaomi MI3, MI4