Moto G XT1033 on Android 5.0 Lollipop

NOTE- This method is used for soft bricked moto g.

Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.

Now flash the Brazilian Kitkat 4.4.4 using this way :-

NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!

Brazilian kitkat 4.4.4 link- Download
Download mfastboot - Download
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)

Connect your moto g to pc in fastboot mode.

In the command prompt flash 4.4.4 using the following commands :-

mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot

Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.

The screen would be flickering after the boot after the boot has finished.
Transfer moto g brazilian update to your phone and reboot into recovery.
Place in on the root of your sdcard.

Link - Download

Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.

Congratulations! You have unbricked your moto g

Moto G XT1033 on Android 5.0 Lollipop